USBs these days are actually necessities which people need in order to store important data that they have. Of course with it being so popular, many people would actually think of jazzing these thumb drives up a bit. One can actually make custom made usb drives in his home without spending too much.
The very first thing that one would do would be to of course get a thumb drive and take off its existing outer cover. This is an imperative step in the process because one cannot create another outer cover if there already is in. Now when doing this, one has to be extremely careful as not to damage to inside.
A suggested thing to do would be to use a screwdriver instead of bare hands to split open the case. Now do take note that there are no screws on thumb drives but it will be help to snap open the covering. With a screwdriver, it will also be less likely that one will damage the internal part because he will not need to use too much force.
The next step in this process would be to find an outer covering for the thumb drive. Now this is the rather interesting part because this is where one can get creative. This outer covering can be made from practically any material ranging from plastic to metal or anything else.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
In this step, one would have to get a drill because he will need to open up a hole if for example, his toy does not have a hole on top. Now he will be needing a lot of measurements like the width as well as the length. Once he has already drilled the hole, then all he has to do would be to put the usb in.
The last step in the process is to use some epoxy or super glue to stick the thumb drive to the hole. To do this step, one has to just slot the drive inside the hole then put the glue all over the entrance of the hole. After that, he should let the glue dry by putting the newly made thumb drive across an electric fan so that the glue will dry.
So basically, those are some steps on how to create a custom thumb drive. Most people would go to stores in order to make these things. However, one can actually save a lot of money and time if he would just learn the easy steps of creating these things at his very home. These steps are extremely easy to do and practically anyone can do it as long as he has some basic materials at home.
The very first thing that one would do would be to of course get a thumb drive and take off its existing outer cover. This is an imperative step in the process because one cannot create another outer cover if there already is in. Now when doing this, one has to be extremely careful as not to damage to inside.
A suggested thing to do would be to use a screwdriver instead of bare hands to split open the case. Now do take note that there are no screws on thumb drives but it will be help to snap open the covering. With a screwdriver, it will also be less likely that one will damage the internal part because he will not need to use too much force.
The next step in this process would be to find an outer covering for the thumb drive. Now this is the rather interesting part because this is where one can get creative. This outer covering can be made from practically any material ranging from plastic to metal or anything else.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
In this step, one would have to get a drill because he will need to open up a hole if for example, his toy does not have a hole on top. Now he will be needing a lot of measurements like the width as well as the length. Once he has already drilled the hole, then all he has to do would be to put the usb in.
The last step in the process is to use some epoxy or super glue to stick the thumb drive to the hole. To do this step, one has to just slot the drive inside the hole then put the glue all over the entrance of the hole. After that, he should let the glue dry by putting the newly made thumb drive across an electric fan so that the glue will dry.
So basically, those are some steps on how to create a custom thumb drive. Most people would go to stores in order to make these things. However, one can actually save a lot of money and time if he would just learn the easy steps of creating these things at his very home. These steps are extremely easy to do and practically anyone can do it as long as he has some basic materials at home.
About the Author:
Why search everywhere for custom made usb drives when you can easily find them on our website. To see what we have on offer, simply visit our homepage at http://bestcustomflashdrives.com today.
No comments:
Post a Comment